Engine Coolant Temperature Sensor Replacement. Chevrolet Cobalt 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Cobalt 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Coolant Temperature Sensor Replacement

Callout	Component Name
Preliminary Procedures Remove the junction block bracket. Refer to Underhood Electrical Center or Junction Block Bracket Replacement Partially drain the cooling system. Refer to Cooling System Draining and Filling.
1	Engine Coolant Temperature Sensor Caution: Refer to Fastener Caution in the Preface section. Procedure Disconnect the electrical connector. Tighten 20 N·m (15 lb ft)

Callout

Component Name

Engine Coolant Temperature Sensor

Caution: Refer to Fastener Caution in the Preface section.

Disconnect the electrical connector.

Tighten
20 N·m (15 lb ft)