Ignition Coil Replacement for Chevrolet Cobalt 2009

1. Ensure that the ignition key is in the OFF position.
2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement.
3. Disconnect the ignition coil electrical connector(s) (1).



4. Remove the ignition coil bolt(s).
5. Remove the ignition coil(s).

1. Install the ignition coil(s).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the ignition coil bolt(s) and tighten to 10 N·m (89 lb in).



3. Connect the ignition coil electrical connector(s) (1).
4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement.