Removal Procedure
- Remove the left headlamp housing bracket. Refer to
Headlamp Replacement.
- Disconnect the horn electrical connector.
- Remove the horn bracket bolt (1).
- Remove the horn (2) from the front frame rail.
Installation Procedure
- Position the horn (2) into the slot in the front frame rail.
Caution: Refer to Fastener Caution in the Preface section.
- Install the horn bracket bolt (1). Tighten the bolt to
10 N·m (89 lb in).
- Connect the horn electrical connector.
- Install the left headlamp housing bracket. Refer to
Headlamp Replacement.