Preliminary Procedure

1. Remove the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement.
2. Disconnect the electrical connector from the stop/turn signal lamp socket.
3. Remove the stop/turn bulb lamp socket from the lamp assembly.

1

Tail Turn Signal Lamp Nut (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
5 N·m (44 lb in)

2

Tail Lamp Turn Signal Lamp Assembly

Tip
Push the lamp assembly outward from the rear end panel extension.