Special Tools

For equivalent regional tools, refer to Special Tools.

1. In order to aid in the assembly, lubricate the seal with transmission fluid.
2. Assemble the 2nd clutch piston and seal assembly (404) into the driven sprocket support (401).
3. Assemble the 2nd clutch spring and retainer assembly (405) into the driven sprocket support.



4. Compress the 2nd clutch spring assembly. Use the J 41232 spring compressor and J 23327 spring compressor or equivalent.
5. Assemble the 2nd clutch spring retainer snap ring (406).
6. Remove the J 41232 spring compressor and J 23327 spring compressor .



7. Assemble two new seal rings (403) onto the driven sprocket support.