Front Side Door Emblem/Nameplate Replacement. Chevrolet Cobalt 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Cobalt 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Front Side Door Emblem/Nameplate Replacement

Front Side Door Emblem/Nameplate Replacement Supercharged

Callout

Component Name

Door Emblem (Supercharged)

Tip

•	The emblem is attached using double sided tape. Use J 25070 or equivalent to aid in removal.

•	If the emblem is missing, take dimensions from the other side of the vehicle for proper location.

J 25070 Heat Gun 500-750°F

Callout	Component Name
Special Tools J 25070 Heat Gun 500-750°F
1	Front Door Emblem (SS) Procedure Use a J 25070 or equivalent to remove the old emblem. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing the new emblem. When removing protective liners from adhesive backed emblems, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion. Install the emblem with the door in the closed position. Ensure full adhesion is made when installing the new emblem to the door.
2	Front Door Emblem Procedure Use a J 25070 or equivalent to remove the old emblem. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing new emblem. When removing protective liners from adhesive backed emblems, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion. Install the emblem with the door in the closed position. Ensure full adhesion is made when installing the new emblem to the door.

Callout

Component Name

J 25070 Heat Gun 500-750°F

Front Door Emblem (SS)

Use a J 25070 or equivalent to remove the old emblem. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing the new emblem.
When removing protective liners from adhesive backed emblems, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
Install the emblem with the door in the closed position.
Ensure full adhesion is made when installing the new emblem to the door.

Front Door Emblem

Use a J 25070 or equivalent to remove the old emblem. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing new emblem.
When removing protective liners from adhesive backed emblems, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
Install the emblem with the door in the closed position.
Ensure full adhesion is made when installing the new emblem to the door.