Preliminary Procedures

1. Disable the SIR system.
2. Remove the instrument panel (I/P) trim plates. Refer to the following procedures:

•	Instrument Panel Trim Panel Replacement - Right Side

•	Driver Information Display Switch Replacement

•	Instrument Panel Trim Panel Replacement - Left Side

•	Instrument Panel Outer Trim Cover Replacement

3. Remove the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.
4. Remove the passenger inflatable restraint module. Refer to Instrument Panel Inflatable Restraint Module Replacement.
5. Remove the I/P upper trim pad air grille assembly. Refer to Defroster Grille Replacement.

1

Instrument Panel Trim Pad Screw (Qty: 12)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.3 N·m (19 lb in)

2

Instrument Panel Trim Pad Assembly

Procedure

1. Disconnect the electrical connections.
2. Lift up to release the I/P top panel from the I/P retainer.
3. When replacing trim pad assembly, transfer all necessary components.