Inflatable Restraint Front End Sensor Replacement. Chevrolet Cobalt 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Cobalt 🢒 Safety and Security 🢒 Supplemental Inflatable Restraints 🢒 Inflatable Restraint Front End Sensor Replacement

Callout	Component Name
Warning: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs. Preliminary Procedure Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
1	Forward Discriminating Sensor Bolt (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tip Loosen the bolts in order to remove the sensor. Tighten 8 N·m (71 lb in)
2	Forward Discriminating Sensor Procedure Remove the connector position assurance (CPA) retainer. Disconnect the electrical connector.

Callout

Component Name

Warning: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

Preliminary Procedure

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.

Forward Discriminating Sensor Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Loosen the bolts in order to remove the sensor.

Tighten
8 N·m (71 lb in)

Forward Discriminating Sensor

Procedure

Remove the connector position assurance (CPA) retainer.
Disconnect the electrical connector.