Tools Required

J 43244 Relay Puller Pliers

1. Remove the electrical center cover.
2. Locate the cooling fan relay. Refer to Electrical Center Identification Views in Wiring Systems to locate the electrical center where the cooling fan relay exists.

Important: 

•	Always note the orientation of the relay.

•	Make sure the electrical center is secure, as not to put added stress on the wires or terminals.




3. Using the J 43244 position the tool on opposing corners of the cooling fan relay.

Notice: Use J43244 to pull the relay straight out from the electrical center terminals. The use of pliers or a flat bladed tool could damage the electrical center.

4. Remove the cooling fan relay (2) from the electrical center.

1. Install the cooling fan relay in the same position as removed.
2. Install the electrical center cover.