GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 Colorado Pickup - 2WD 🢒 Preface 🢒 Cautions and Notices 🢒 Drive Belt Tensioner Replacement

Removal Procedure
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Inspect the drive belt. Change the drive belt as necessary.
  3. Using a wrench loosen and remove the drive belt tensioner bolt.

    4. Object Number: 858153 Size: SH
  4. Remove the drive belt tensioner.

Installation Procedure

    Object Number: 858153 Size: SH
  1. Install the drive belt tensioner.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the drive belt tensioner bolt.

    3. Tighten
    Tighten the drive belt tensioner bolt to 50 N·m (37 lb ft).

  3. Install the drive belt Drive Belt Replacement .