GM Service Manual Online
For 1990-2009 cars only

Cause

Correction

Abnormalities (severe cracking, bumps or missing areas) in the accessory drive belt

Abnormalities in the accessory drive system and/or components may cause engine RPM variations, noises similar to a faulty lower engine and also lead to a misfire condition. A misfire code may be present without an actual misfire condition.

Replace the drive belt.

Worn, damaged, or mis-aligned accessory drive components or excessive pulley runout

A misfire code may be present without an actual misfire condition.

Inspect the components, repair or replace as required.

Loose or improperly installed engine flywheel or crankshaft balancer

A misfire code may be present without an actual misfire condition.

Repair or replace the flywheel and/or balancer as required.

Worn Piston Rings

Oil consumption may or may not cause the engine to misfire.

    • Inspect the spark plugs for oil deposits.
    • Inspect the cylinders for a loss of compression. Refer to Engine Compression Test .
    • Perform cylinder leak down and compression testing to determine the cause.
    • Repair or replace as required.

Worn Crankshaft Thrust Bearings

Severely worn thrust surfaces on the crankshaft and/or thrust bearing may permit fore and aft movement of the crankshaft and create a DTC without an actual misfire condition.

Replace the crankshaft and bearings as required.