GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Colorado Pickup - 2WD 🢒 Body 🢒 Bumpers 🢒 Rear Bumper Step Center Pad Replacement

Removal Procedure

    Object Number: 1505967 Size: SH

    Notice: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.

    Notice: Use a plastic, flat-bladed tool to prevent paint damage when removing an emblem/name plate.

  1. Apply masking tape to protect the bumper surfaces.
  2. Pry the step pad (1) from the bumper bar (2) and the reinforcement (3) using a flat-bladed plastic tool.
  3. Grasp the step pad from the outer edge, pull upward to release it from the bumper bar (2) and the reinforcement (3).

Installation Procedure

    Object Number: 1505967 Size: SH
  1. Position the step pad to the bumper bar (2) and the reinforcement (3).
  2. Press the step pad down.
  3. Remove the masking tape.