Removal Procedure
- Remove the rear side access door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Remove the bolt retaining the rear side access door
check link to the body.
- Remove the nuts retaining the rear side access door
check link to the door.
- Remove the rear side access door check link (1) from the door.
Installation Procedure
- Install the rear side door check link to the door, ensuring the alignment mark (1)
faces upward.
Notice: Refer to Fastener Notice in the Preface section.
- Install the nuts retaining the rear side door check link to the door.
Tighten
Tighten the rear side access check link nuts to 9 N·m (80 lb in).
- Install the bolt retaining the rear side access check link to the body.
Tighten
Tighten the rear side access check link bolt to 25 N·m (18.4 lb ft).
- Install the rear side access door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.