Preliminary Procedures

1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
3. Remove the lower steering column trim cover. Refer to Steering Column Trim Covers Replacement .

1

Ignition/Start Switch Electrical Connector

2

Ignition/Start Switch Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
0.74 N·m (7 lb in)

3

Ignition/Start Switch

Procedure

Turn the ignition lock cylinder to the run position prior to removing the ignition/start switch.