GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Colorado Pickup - 2WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Vehicle Speed Sensor Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 1302108 Size: SH
  2. Disconnect the vehicle speed sensor (VSS) electrical connector (2).

    3. Object Number: 880951 Size: SH
  3. Remove the VSS with O-ring seal.

Installation Procedure

    Notice: Refer to Component Fastener Tightening Notice in the Preface section.


    Object Number: 880951 Size: SH
  1. Install the VSS with O-ring seal.

    2. Tighten
    Tighten the vehicle speed sensor (VSS) to 17 N·m (13 lb ft).


    Object Number: 1302108 Size: SH
  2. Connect the VSS electrical connector (2).
  3. Lower the vehicle.