Tools Required

1. Remove the rear seat. Refer to Rear Bench Seat Replacement.

Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the inner trim of the window.

2. Remove the body side trim panel, for extended cab pickup only.
3. Remove the rear child seat belt anchor brackets. Refer to Child Seat Restraint System Belt Bracket Replacement.

Caution: If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause personal injury.

4. Cover to protect the following parts from broken glass:

•	The upper dash pad

•	The defroster outlets and A/C outlets

•	The seats and carpeting

Caution: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.

5. If the glass is already broken, use the J 24402-A in order to remove the window.




Important: 

•	Keep the cutting edge of the tool against the window from inside the vehicle. This will allow the urethane adhesive to be separated from the window.

•	Leave a base of urethane on the pinchweld flange.

•	The only suitable lubrication is clear water.

•	Use the J 24402-A , J 39032 or equivalent in order to remove the window.

6. With the aid of an assistant, lift the rear window from the opening.



7. Use body color paint and apply to any scratches exterior (1, 5).

1. Install a stationary window into the opening. Refer to Adhesive Installation of Stationary Windows.
2. Install the rear child seat belt anchor brackets. Refer to Refer to Child Seat Restraint System Belt Bracket Replacement.
3. Install the body side trim panel, for extended cab pickup only.
4. Install the rear seat. Refer to Rear Bench Seat Replacement.
5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.