GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Colorado Pickup - 2WD 🢒 Body Systems 🢒 Vehicle Access 🢒 Door Striker Replacement

Removal Procedure

    Object Number: 1256434 Size: SH
  1. Mark the position of the door striker with a grease pencil.
  2. Remove the screw retaining the door striker to the body.
  3. Remove the door striker from the body.

Installation Procedure

    Object Number: 1256434 Size: SH
  1. Install the door striker to the body.
  2. Align the lock striker to the alignment marks.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the door striker screws to the body.

    4. Tighten
    Tighten the door striker screws to 25 N·m (18 lb ft).

  4. Adjust the lock striker if required. Refer to Door Lock Striker Adjustment .