GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Colorado Pickup - 2WD 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Release Cable Replacement

Removal Procedure

    Object Number: 1241640 Size: SH
  1. Release the park brake pedal.
  2. Remove the knee bolster panel. Refer to Knee Bolster Replacement .
  3. Press the locking tabs for the release handle.

    4. Object Number: 1241653 Size: SH
  4. Remove the release handle.

    5. Object Number: 1241664 Size: SH
  5. Press the locking tabs for the release cable at the lower dash panel.
  6. Remove the release cable from the lower dash panel.

    7. Object Number: 1241676 Size: SH
  7. Remove the release cable from the park brake pedal mounting bracket.
  8. Remove the release cable from the release lever.
  9. Remove the release cable.

Installation Procedure

    Object Number: 1241676 Size: SH

    Important: Ensure that the release cable is properly seated in the release lever.

  1. Install the release cable to the release lever.

    2. Important: When installing the park brake release handle or cable, ensure that the locking tabs are properly seated. A snap or clip should be heard or felt if installed properly.

  2. Attach the release cable in the park brake pedal mounting bracket.

    3. Object Number: 1241664 Size: SH
  3. Install the release cable to the knee bolster panel.
  4. Install the knee bolster panel. Refer to Knee Bolster Replacement .

    5. Object Number: 1241653 Size: SH
  5. Install the park brake release handle to the release cable.