GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Colorado Pickup - 2WD 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Instrument Panel Compartment Door Latch Replacement

Removal Procedure
  1. Open the instrument panel (I/P) storage compartment.

    2. Object Number: 1251610 Size: SH
  2. Remove the screws retaining the storage compartment handle assembly.
  3. Remove the handle assembly from the vehicle.

Installation Procedure

    Object Number: 1251610 Size: SH
  1. Install the handle assembly the storage compartment.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws retaining the handle assembly to the storage compartment.

    3. Tighten
    Tighten the screws to 3 N·m (27 lb in).

  3. Ensure the handle assembly is working properly.