Ignition Lock Cylinder Replacement. Chevrolet Colorado Pickup

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Colorado Pickup - 2WD 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Ignition Lock Cylinder Replacement

Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
Turn the ignition lock cylinder to the accessory position.
Insert the 90 degree tip of a pick type tool into the ignition lock cylinder access hole.
Push and hold the ignition lock cylinder retaining pin down.
Pull the ignition lock cylinder away from the steering column.

1.1.	Turn the ignition lock cylinder to the accessory position.

1.2.	Push the ignition lock cylinder in until the retaining pin locks it in place.

Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .