GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Colorado Pickup - 2WD 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Door Lock Switch Replacement - Driver Door

Removal Procedure

    Object Number: 1276818 Size: SH
  1. Remove the 2 screws securing the switch plate assembly to the door trim panel.
  2. Lift the front of the switch plate up to disengage clip.
  3. Remove the switch plate out of the door trim panel opening.

    4. Object Number: 1276817 Size: SH
  4. Disconnect the electrical connectors (3, 4) from the switches (2, 5).
  5. Remove the switch plate assembly (1) from the vehicle.
  6. If replacing only the switches, remove the switches from the plate.
  7. If replacing only the switch plate, retain the switches for transfer.

Installation Procedure

    Object Number: 1276817 Size: SH
  1. Install the switches (2, 5) to the switch plate (1).
  2. Connect the electrical connectors (3, 4) to the switches (2, 5).

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1276818 Size: SH
  3. Install the switch plate assembly to the door trim panel with the 2 screws.

    4. Tighten
    Tighten the front door switch plate screws to 2 N·m (18 lb in).