GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Colorado Pickup - 2WD 🢒 Safety and Security 🢒 Seat Belts 🢒 Seat Belt Buckle Replacement - Center Front

Removal Procedure

    Object Number: 1364958 Size: SH
  1. Remove the rear inboard seat bolt from the driver seat.
  2. Remove the grommet securing the center seat belt buckle assembly (1) to the seat adjuster.
  3. Remove the center seat belt buckle assembly (1).

Installation Procedure

    Object Number: 1364958 Size: SH
  1. Position the seat belt buckle assembly (1) over the rear inboard seat adjuster mounting hole.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front seat mounting bolt (2).

    3. Tighten
    Tighten the front seat mounting bolt to 52.5 N·m (39 lb ft).