- Remove the oil receiver.
- If RWD, remove the oil
trough bolt.
- Remove the oil trough.
- For the 4WD transmission,
using a suitable prying tool, remove the output shaft seal from the extension
housing.
- For the RWD transmission,
using a suitable prying tool, remove the output shaft seal from the extension
housing.
- Remove the reverse control
lever restrictor pin plug. Discard the plug. A new plug is required for
assembly.
- Remove the roll pin for
the reverse control lever restrictor.
- Remove the reverse control lever restrictor.
- For the 4WD transmission,
remove the shift control shaft plug. Only remove the plug if it is
leaking.