For 1990-2009 cars only
- Lubricate the valve lifters (209) and engine block valve lifter bores with clean engine oil.
- Insert the valve lifters into the lifter guides (210).
- Install the valve lifters and guide assembly (210) to the engine block.
- Install the valve lifter guide bolts (211) and tighten to 12 NĀ·m (106 lb in).
Note:
| ā¢ | When using the valve lifters again, install the lifters to their original locations. |
| ā¢ | If camshaft replacement is required, the valve lifters must also be replaced. |
Align the flat area on the top of the lifter with the flat area in the lifter guide bore. Push the lifter completely into the guide bore.
Caution: Refer to Fastener Caution in the Preface section.
