GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2009
🢒
Colorado Pickup - 2WD
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 Parking Brake Indicator Switch Replacement
Removal Procedure
Remove the knee bolster trim panel. Refer to
Knee Bolster Replacement
.
Remove the electrical connector.
Remove the park brake warning lamp switch mounting bolt.
Remove the park brake warning lamp switch from the vehicle.
Installation Procedure
Install the park brake warning lamp switch.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the park brake warning lamp switch mounting bolt and tighten to
4 N·m (35 lb in)
.
Install the electrical connector.
Install the knee bolster trim panel. Refer to
Knee Bolster Replacement
.