|
Important: Twisted-pair wires provide an effective "shield" that helps protect sensitive
electronic components from electrical interference.
In order to prevent electrical interference from degrading the performance
of the connected components, you must maintain the proper specification when making
any repairs to the twisted-pair wires shown :
• | The I/P harness wires must be twisted a minimum of 9 turns per 31 cm
(12 in) as measured anywhere along the length of the wires. |
• | The Body and Door harness wires must be twisted a minimum of 10 turns per 31 cm
(12 in) as measured anywhere along the length of the wires. |
• | The outside diameter of the twisted wires must not exceed 6.0 mm
(0.2 in). |
|