Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Loosen the transfer case shield bolt (1).
- Remove the remaining transfer case shield bolts (2) from the transfer case.
- Remove the transfer case shield (3) from the transfer case.
Installation Procedure
- Position the transfer case shield (3) to the transfer case and bolt (1).
Notice: Refer to Fastener Notice in the Preface section.
- Install the transfer case shield bolts (2).
Tighten
Tighten the transfer case shield bolts to 20 N·m (15 lb ft).
- Lower the vehicle.