GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Colorado Pickup - 4WD 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 1350709 Size: SH
  2. Disconnect the engine wiring harness electrical connector (2) from the oil pressure switch (1).

    3. Object Number: 954098 Size: SH
  3. Remove the engine oil pressure switch.

Installation Procedure

    Notice: Refer to Component Fastener Tightening Notice in the Preface section.


    Object Number: 954098 Size: SH
  1. Install the engine oil pressure switch.

    2. Tighten
    Tighten the oil pressure switch to 20 N·m (15 lb ft).


    Object Number: 1350709 Size: SH
  2. Connect the engine wiring harness electrical connector (2) to the oil pressure switch (1).
  3. Lower the vehicle.