GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Colorado Pickup - 4WD 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Release Cable Replacement

Removal Procedure

    Object Number: 1241640 Size: SH
  1. Release the park brake pedal.
  2. Remove the knee bolster panel. Refer to Knee Bolster Replacement in Instrument Panel, Gages and Console.
  3. Press the locking tabs for the release handle.

    4. Object Number: 1241653 Size: SH
  4. Remove the release handle.

    5. Object Number: 1241664 Size: SH
  5. Press the locking tabs for the release cable at the lower dash panel.
  6. Remove the release cable from the lower dash panel.

    7. Object Number: 1241676 Size: SH
  7. Remove the release cable from the park brake pedal mounting bracket.
  8. Remove the release cable from the release lever.
  9. Remove the release cable.

Installation Procedure

    Object Number: 1241676 Size: SH

    Important: Ensure that the release cable is properly seated in the release lever.

  1. Install the release cable to the release lever.

    2. Important: When installing the park brake release handle or cable, ensure that the locking tabs are properly seated. A snap or clip should be heard or felt if installed properly.

  2. Attach the release cable in the park brake pedal mounting bracket.

    3. Object Number: 1241664 Size: SH
  3. Install the release cable to the knee bolster panel.
  4. Install the knee bolster panel. Refer to Knee Bolster Replacement in Instrument Panel, Gages and Console.

    5. Object Number: 1241653 Size: SH
  5. Install the park brake release handle to the release cable.