GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2009
🢒
Colorado Pickup - 4WD
🢒
Engine
🢒
Engine Controls and Fuel - 3.7L
🢒 Engine Lift Bracket Replacement
Removal Procedure
Remove the drive belt. Refer to
Drive Belt Replacement
.
Remove the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift bracket (1).
Carefully disengage the engine wiring harness conduit (4) from the engine lift bracket (1).
Remove the 3 generator mounting bolts.
Remove the bolts securing engine lift bracket to the engine.
Remove the engine lift bracket from the engine.
Installation Procedure
Position the engine lift bracket to the engine.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the bolts securing engine lift bracket to the engine.
•
Tighten the bolts a first pass in sequence to
5 N·m (44 lb in)
.
•
Tighten the bolts a final pass in sequence to
50 N·m (37 lb ft)
.
Position the generator to the engine.
Install the generator mounting bolts and tighten in sequence to
50 N·m (37 lb ft)
.
Engage the engine wiring harness conduit (4) to the engine lift bracket (1).
Install the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift bracket (1).
Tighten the bolt to
9 N·m (80 lb in)
.
Install the drive belt. Refer to
Drive Belt Replacement
.