GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Colorado Pickup - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Blower Motor Replacement

Removal Procedure
  1. Remove the right hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Right Side.

    2. Object Number: 888417 Size: SH
  2. Remove the blower motor mounting screws.
  3. Remove the blower motor cooling tube (2).
  4. Disconnect the blower motor electrical connector (4).
  5. Remove the blower motor (3).

Installation Procedure

    Object Number: 888417 Size: SH
  1. Install the blower motor (3).
  2. Connect the blower motor electrical connector (4).
  3. Install the blower motor cooling tube (2).

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the blower motor mounting screws. Tighten the screws to 2 N·m (18 lb in).
  5. Install the right hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Right Side.