GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Colorado Pickup - 4WD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Jack and Tool Stowage Container Bracket Replacement

Removal Procedure
  1. Remove the jack stowage cover. Refer to Jack Stowage Cover Replacement.

    2. Object Number: 1334367 Size: SH
  2. Remove the jack from the stowage bracket by turning the jack handle to loosen the jack.
  3. Remove the 2 bolts securing the jack stowage bracket to the vehicle.

Installation Procedure

    Object Number: 1334367 Size: SH
  1. Position the jack stowage bracket on the floor stud in the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the 2 bolts securing the jack stowage bracket to the vehicle. Tighten the jack stowage bracket bolts to 9 N·m (79 lb in).

    3. Object Number: 1334375 Size: SH
  3. Install the jack in the stowage bracket by positioning the jack on the 2 studs then turning the jack handle to tighten the jack in the bracket.
  4. Install the jack stowage cover. Refer to Jack Stowage Cover Replacement.