REVISION: 09/26/95
THIS BULLETIN IS BEING REVISED TO CHANGE SECTION NUMBER AND TO CHANGE PISTON PIN SPECIFICATIONS. PLEASE DISCARD BULLETIN 57-61-23. ----------------------------------------------------------------------
THERE HAS BEEN A MID-YEAR CHANGE IN THE PISTON PIN CLEARANCE. IT HAS BEEN REDUCED TO PREVENT PISTON PIN NOISE (REFER TO BULLETIN 57-61-24).
PISTON PIN SPECIFICATIONS
ENGINES PRODUCED PRIOR TO JANUARY 1995 0.0126 MM - 0.0245 MM (0.0005 IN. - 0.0010 IN.) ENGINES PRODUCED AFTER DECEMBER 1994 0.0096 MM - 0.0216 MM (0.0003 IN. - 0.0008 IN.)
FIGURES: 0
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1995. GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.