GLOW AROUND WIPER SWITCH REWORK WIPER SWITCH BEZEL

SOME EARLY 1981 CORVETTES WITH SILVER, RED, OR RUST TRIM MAY EXHIBIT A GLOW AT NIGHT AROUND THE WIPER SWITCH BEZEL. IN THESE COLORS, THE BEZEL BASE MATERIAL IS "NATURAL" AND COULD BECOME TRANSLUCENT WITH LIGHTS TURNED ON. THE REMAINING BEZEL COLORS WERE PAINTED OVER A BLACK BASE MATERIAL AND ARE NOT AFFECTED. THE "NATURAL" BASE MATERIAL WAS CANCELLED IN SEPTEMBER, 1980. THE GLOWING CONDITION CAN BE ELIMINATED BY REPLACING THE ORIGINAL BEZEL WITH P/N 14016216, WHICH IS BLACK AND MUST BE PAINTED TO MATCH TRIM COLOR. THE BEZEL HAS A LOCKING TAB WHICH ENGAGES THE WIPER SWITCH AS ILLUSTRATED ON PAGE 2. REPLACEMENT REQUIRES SETTING THE STEERING COLUMN TO ITS LOWEST TILT POSITION, REMOVING THE SPEEDOMETER CLUSTER, AND REACHING THROUGH THE INSTRUMENT PANEL TO DISCONNECT THE BEZEL LOCKING TAB. * ILLUSTRATION *

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.