NEW P/N(NUT),REV.TORQUE SPEC. STAB.BAR LINK NUTS CHANGE

VEHICLES AFFECTED: 1984 Corvette

The Corvette front stabilizer bar link attaching nuts were changed in August, 1984 to a torque prevailing type. The new part number is 11501033 and should be used when service involving the stabilizer bar is required. The torque required for the 11501033 nut is 34 N.m or 25 lb. ft.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.