REPLACE FRONT PARK/TURN LAMP REVISED FOGLAMPS

VEHICLES AFFECTED: 1984 Corvette

Step 2 of subject procedure found on Page 8B-14, Section 8B, of the 1984 Corvette Loose Leaf Shop Manual is revised to read as follows:

2. To replace the light housing, it will be necessary to remove the front bumper facia as outlined in Section 2B, Bumpers of the 1984 Corvette Loose Leaf Shop Manual. The lamp housing assembly attaching screws will then be accessible. Remove the two attaching screws, remove the twist lock socket and replace the housing.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.