UPDATE-STEERING GEAR INTER- MEDIATE SHAFT TORQUE SPEC.

VEHICLES AFFECTED: 1984-89 Y-CAR

The following specifications supersede information previously published in the 1984-1989 Corvette Service Manuals, Section 3B5 (1984-88) and Section 3F3 (1989).

Model Intermediate Shaft Intermediate Shaft Year to Column to Gear ----- --------- ------- 1984 48 Nm (35 ft. lbs.) 48 Nm (35 ft. lbs.)

1985 48 Nm (35 ft. lbs.) 48 Nm (35 ft. lbs.)

1986 34 Nm (25 ft. lbs.) 48 Nm (35 ft. lbs.)

1987 34 Nm (25 ft. lbs.) 48 Nm (35 ft. lbs.)

1988 34 Nm (25 ft. lbs.) 48 Nm (35 ft. lbs.)

1989 34 Nm (25 ft. lbs.) 48 Nm (35 ft. lbs.)

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.