GM Service Manual Online
For 1990-2009 cars only

MANUAL UPDATE-CONNECTING ROD GENERAL DESCRIPTION REVISION

VEHICLES AFFECTED: 1989 Y-CAR W/5.7 (VIN 8)

The information in this bulletin supersedes information published on page 6A1-1 of Section 6A1, "Engine Mechanical" in the 1989 Corvette Service Manual.

The connecting rod description stating that a piston pin bushing is pressed into the piston end of the rod and reamed to size is incorrect. The piston pin is pressed into the piston end of the connecting rod.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.