Power Seat (AQ9) inoperative and/or blows fuse.
Seat Control Switch Wire Harness may be shorted at gearnut support bracket. (See Illustration) With seat cushion installed, harness contacts gearnut support bracket and may become shorted with weight of driver/passenger.
------------ Repair and/or replace harness as required. Using a section of rubber hose (gas line) about (4) inches long (split), cover harness as illustrated taping both ends.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.