Roof panel attaching bolts rattle.
Retainer assembly may allow the bolt to rattle.
The new roof attaching bolt retainer P/N 101 93699 must be used with the new silencer P/N 10218584 which holds the bolt in the retainer.
Prior to installing the new retainer, insert the bolt into the silencer and then install this assembly into the retainer cavity.
Install the new retainer/silencer/bolt assembly on the vehicle using the procedure found in Section 1O-9A-5 of the 1992 Corvette Service Manual.
Parts are currently available from GMSPO.
Labor Operation: B-2647
Use applicable labor time guide for labor hours.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.