GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Corvette 🢒 Engine 🢒 Engine Controls - 4.3L (Caprice Only) and 5.7L 🢒 Mass Airflow Sensor Replacement

Removal Procedure

    Important: Take care when handling the MAF. Do not dent, puncture, or otherwise damage the Honeycell located at the air inlet end of the MAF. Do not touch the sensing elements or allow anything (including cleaning solvents and lubricants) to come in contact with them. A small amount of GM lubricant (P/N=99855406) may be used on the air duct only, to aid in installation. Do not drop or roughly handle the MAF.

  1. Disconnect the MAF sensor electrical connector.

    2. Object Number: 13744 Size: SH
  2. Carefully spread crimped area of duct clamps (2) and remove MAF sensor (1).

Installation Procedure

    Important:: Embossed arrows on MAF sensor indicate proper air flow direction and must point toward the engine.


    Object Number: 13744 Size: SH
  1. Install the MAF sensor (1) into air duct.
  2. Install new clamps supplied with sensor. Crimp clamps (2) using tool J 22610.
  3. Connect the electrical connector.