For 1990-2009 cars only
Removal Procedure
Tools Required
J 23907 Clutch Pilot Bearing Remover
Notice: Do not use grease under pressure to force the pilot bearing from the crankshaft.
Important:
• Use care when removing the clutch pilot bearing. • One of the following conditions may be the cause of the clutch
pilot bearing failure: - Improper clutch housing alignment - Eccentricity in the transmission input shaft
- Remove the flywheel. Refer to Engine Flywheel Replacement in Engine Mechanical.
- Use the J 23907 in order to remove the clutch pilot bearing.
- Inspect the crankshaft for scoring and burrs.
Installation Procedure
Tools Required
J 38836 Pilot Bushing Installer/Clutch Alignment Arbor
- Use the J 38836 in order to install the clutch pilot bearing.
- Install the flywheel. Refer to Engine Flywheel Replacement in Engine Mechanical.
