Tools Required

J 25034-C Pump Pulley Remover

1. Remove the accessory drive belt. Refer to Drive Belt Replacement in Engine Mechanical.
2. Remove the power steering pump pulley hub plug.
3. Install the J 25034-C on the pump pulley and remove the pulley.

Tools Required

J 25033-C Pump Pulley Installer

1. Using J 25033-C install the pump pulley onto the pump.

Important: Pulley must be installed onto pump shaft so that the pulley hub is flush with the pump shaft.

2. Install the hub plug into pulley.
3. Install the accessory drive belt. Refer to Drive Belt Replacement in Engine Mechanical.