Removal Procedure
- Disconnect the negative battery cable.
Refer to
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
in General Information. - Remove the fuel rail cover.
- Disconnect the ignition coil harness connector.
- Disconnect the spark plug wire at the ignition coil.
- Remove the ignition coil mounting bolts.
- Remove the ignition coil.
Installation Procedure
- Install the ignition coil.
- Install the ignition coil mounting bolts.
- Connect the spark plug wire at the ignition coil.
- Connect the ignition coil harness connector.
- Install the fuel rail cover.
- Connect the negative battery cable.
Tighten
Tighten the ignition coil mounting bolts to 12 N·m (106 lb in).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the harness bolt to 12 N·m (106 lb in).
Tighten
Tighten the negative battery cable bolt to 15 N·m (11 lb ft).
