Tire Pressure Monitoring Sensors for Chevrolet Corvette 1997

1. Raise the vehicle on a suitable support. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the tire and wheel assembly. Refer to Wheel Removal .
3. Remove the tire from the wheel. Refer to Tire Mounting and Dismounting .
4. Remove the TPM sensor nut.
5. Remove the TPM sensor.

1. Position the sensor.
2. Install the sensor nut.

Tighten
Tighten the nut to 12 N·m (106 lb in).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the tire on the wheel. Refer to Tire Mounting and Dismounting .
4. Install the tire and wheel. Refer to Wheel Removal .
5. Lower the vehicle.
6. Program the TPM sensors. Refer to Tire Pressure Indicator Sensor Programming .