GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Corvette 🢒 Brakes 🢒 ABS Brakes - Delco/Bosch 🢒 Steering Wheel Position Sensor Replacement

Removal Procedure

    Object Number: 70107 Size: SH
  1. Remove the steering column from the vehicle. Refer to Steering Column Replacement .
  2. Remove the steering column cowl gasket.

    3. Object Number: 70117 Size: SH
  3. Remove the steering wheel position sensor seal.
  4. Remove the dust cover (3) from the steering wheel position sensor (2).
  5. Remove the steering wheel position sensor (2) from the retainer (1) at the bottom of the steering wheel.

Installation Procedure

    Object Number: 70119 Size: SH
  1. Install the steering wheel position (1) sensor into the adaptor (2) on the bottom of the steering column.
  2. Remove the lock pin from the steering wheel position sensor.
  3. Install the steering wheel position sensor seal onto the steering wheel position sensor.

    4. Object Number: 70107 Size: SH
  4. Install the steering column cowl gasket.
  5. Install the steering column into the vehicle.