GM Service Manual Online
For 1990-2009 cars only

Object Number: 82235  Size: LF
(1)Nut
(2)Tie Rod Seal
(3)Outer Tie Rod Assembly
(4)Jam Nut
(5)Tie Rod End Clamp
(6)Rack and Pinion Boot
(7)Seal Retaining Clamp
(8)Inner Tie Rod Assembly
(9)Shock Dampener Ring
(10)Right Cylinder Line Assembly
(11)O-Ring Seal
(12)Left Cylinder Line Assembly
(13)O-Ring Seal
(14)Partial Rack and Pinion Gear Assembly
(15)Magnasteer Electrical Connector
(16)Adjuster Plug Lock Nut
(17)Shock Dampener Ring
(18)Inner Tie Rod Assembly
(19)Seal Retaining Clamp
(20)Rack and Pinion Boot
(21)Tie Rod End Clamp
(22)Jam Nut
(23)Outer Tie Rod Assembly
(24)Nut
(25)Tie Rod Seal

The constant displacement vane type pump provides hydraulic pressure and flow for the steering system. The pump is belt driven by the power steering pump pulley and crankshaft pulley. The opening at the rear of the pump housing contains:

    • The pump ring
    • The pressure plate
    • The thrust plate
    • The rotor
    • The vanes
    • The end plate

A small opening on the side of the housing contains the pressure line fitting. A pressure relief valve inside the flow control valve limits the pump pressure.