Removal Procedure
- Drain the power steering reservoir.
- Disconnect both hoses and clamps from the reservoir.
- Lift up on the reservoir and slide the reservoir off of the reservoir
bracket.
Installation Procedure
- Position the power steering reservoir on the reservoir bracket and push down
until the reservoir locks into place.
- Connect the power steering reservoir inlet hose and clamp to reservoir.
Important: Make sure that the alignment mark on the power steering reservoir inlet
hose is installed at the bottom of the power steering reservoir.
- Align the lower ear of the hose clamp with the mark on the power
steering reservoir inlet hose.
- Refill the power steering reservoir.
- Bleed the power steering system. Refer to
Power Steering System Bleeding
.