SIR Coil Centering Procedure
- Remove the coil assembly. Refer to
Inflatable Restraint Steering Wheel Module Coil Replacement - Off Vehicle
.
- Hold the coil assembly with the bottom up.
2.1. | While holding the coil assembly, depress the spring lock in order
to rotate the hub in the direction of the arrow until it stops. |
2.2. | Ensure that the coil ribbon is snugly wound against the center
hub. |
- Rotate the coil hub, in the opposite direction of the arrow, approximately
two and a half (2½) turns.
- Release the spring lock between the locking tabs.