GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Corvette 🢒 Steering 🢒 Steering Wheel and Column 🢒 Windshield Wiper Switch

Removal Procedure

    Object Number: 73209 Size: SH
  1. Remove the tilt wheel lever (4). Refer to Tilt Wheel Lever .
  2. Remove the driver's side knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages and Console.
  3. Separate and remove the upper (1) and lower (3) steering column covers.

    4. Object Number: 70097 Size: SH
  4. Disconnect the electrical connector from the wiring harness.
  5. Release the upper and lower retaining clips and slide the wiper/washer switch from the column.

Installation Procedure

    Object Number: 70097 Size: SH
  1. Slide the wiper/washer switch onto the column until the upper and lower retaining clips lock.
  2. Connect the electrical connector into the wiring harness.

    3. Object Number: 73209 Size: SH
  3. Install the upper (1) and lower (3) steering column covers.
  4. Install the tilt wheel lever (4). Refer to Tilt Wheel Lever .
  5. Install the driver's side knee bolster. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages and Console.